Перейти к основному содержанию

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

Английский
Китайский
Шаг 6
In this step you will be transferring the smart cover magnets to the NEW front panel assembly. Use a pair of tweezers to carefully place the upper left smart cover magnet in place. Repeat the procedure with the bottom left smart cover magnet.
  • In this step you will be transferring the smart cover magnets to the NEW front panel assembly.

  • Use a pair of tweezers to carefully place the upper left smart cover magnet in place.

  • Repeat the procedure with the bottom left smart cover magnet.

  • If necessary, use the edge of a plastic opening tool to flatten the piece of tape adhered to the bottom left smart cover magnet.

在此步骤中,您将将smart cover 磁铁转移到新的前面板组件上去。

使用一对镊子小心地将左上方的smart cover磁铁放在适当位置

在左下方smart cover磁铁位置上重复上述步骤。

如有必要,使用塑料打开工具的边缘调整smart cover磁铁下的胶带使其变平。

Ваш вклад лицензируется под свободной лицензией Creative Commons.