Перейти к основному содержанию

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

Английский
Китайский

Translating step 1

Step 1
Remove the two 2.1 mm T5 Torx screws securing the I/O board cable bracket to the logic board. Remove the I/O board cable bracket.
  • Remove the two 2.1 mm T5 Torx screws securing the I/O board cable bracket to the logic board.

  • Remove the I/O board cable bracket.

拆除2颗将I/O板排线挡板固定在主板上的2.1mm T5 内梅花头螺丝。

拿掉I/O板排线挡板。

Ваш вклад лицензируется под свободной лицензией Creative Commons.