Перейти к основному содержанию

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

Английский
Китайский
Step 16
Remove the five 3.5 mm T5 Torx screws securing the logic board to the upper case.
  • Remove the five 3.5 mm T5 Torx screws securing the logic board to the upper case.

  • When reassembling, install all five screws loosely, position the logic board, and then tighten evenly.

拆掉这5颗将主板固定在上部机身(C壳)上的3.5mm T5内梅花头螺丝。

当你重新组装的时候,先不要拧紧这5颗螺丝,调整好主板的位置后再拧紧它们。

Ваш вклад лицензируется под свободной лицензией Creative Commons.