Почините Свои Вещи Сообщество Магазин

Rimozione batteria dal case posteriore iPhone 7

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 2 руководства, которые включают этот шаг.

Назад к руководству
Английский
Итальянский
Шаг 5
iPhone 7 Rear Case Battery Removal: шаг 0, изображение 1 из 2 iPhone 7 Rear Case Battery Removal: шаг 0, изображение 2 из 2

  • If you successfully removed both adhesive strips, move on to the next step. Otherwise, you will need to pry the battery from the rear case.

  • Prepare an iOpener and apply it to the back of the rear case, directly over the battery. Alternatively, you can apply heat using a heat gun or hair dryer.

  • After about a minute, remove the iOpener, flip the phone over and use a plastic card to break up any remaining adhesive behind the battery.

  • Avoid bending the battery. Damage to the battery may release dangerous chemicals, and could start a fire.

  • Do not pry under the top third of the battery, you may damage the volume button ribbon cable.

Se hai rimosso con successo entrambe le strisce adesive, vai direttamente al passo successivo. Altrimenti devi staccare la batteria dal case posteriore.

Prepara un iOpener e applicalo sul retro del case posteriore, direttamente sopra la batteria. In alternativa puoi applicare calore usando una pistola termica o un asciugacapelli.

Dopo circa un minuto, rimuovi l'iOpener, gira il telefono e usa una scheda di plastica per rompere l'adesivo che può essere rimasto sotto la batteria.

Evita di piegare la batteria. Eventuali danni possono causare il rilascio di sostanze chimiche pericolose o un incendio.

Non far leva sotto il terzo superiore della batteria. Potresti danneggiare il cavo piatto del pulsante volume.

[* icon_note] If you successfully removed both adhesive strips, move on to the next step. Otherwise, you will need to pry the battery from the rear case.
[* black] [guide|25705|Prepare an iOpener|new_window=true] and apply it to the back of the rear case, directly over the battery. Alternatively, you can apply heat using a heat gun or hair dryer.
-[* black] After about a minute, remove the iOpener, flip the phone over and use a plastic card to break up any remaining adhesive behind the battery.
+[* black] After about a minute, remove the iOpener, flip the phone over and use a [product|IF145-101|plastic card] to break up any remaining adhesive behind the battery.
[* icon_caution] Avoid bending the battery. Damage to the battery may release dangerous chemicals, and could start a fire.
[* icon_caution] Do not pry under the top third of the battery, you may damage the volume button ribbon cable.

Ваш вклад лицензируется под свободной лицензией Creative Commons .