Почините Свои Вещи Сообщество Магазин

Rimozione batteria per accedere al cavo di accensione e controllo volume nell'iPhone 7

Примечание: Вы редактируете необходимое руководство. Любые внесенные вами изменения повлияют на руководство, которое включает эту стадию.

Назад к руководству
Английский
Итальянский
Шаг 8
iPhone 7 Power and Volume Control Cable Battery Replacement: шаг 0, изображение 1 из 2 iPhone 7 Power and Volume Control Cable Battery Replacement: шаг 0, изображение 2 из 2

  • If you successfully removed both adhesive strips, move on to the next step. Otherwise, you will need to pry the battery from the rear case.

  • Prepare an iOpener and apply it to the back of the rear case, directly over the battery. Alternatively, you can apply heat using a heat gun or hair dryer.

  • After about a minute, remove the iOpener, flip the phone over and use a plastic card to break up any remaining adhesive behind the battery.

  • Avoid bending the battery. Damage to the battery may release dangerous chemicals, and could start a fire.

  • Do not pry under the top third of the battery, you may damage the volume button ribbon cable.

Se hai rimosso con successo entrambe le strisce adesive, vai al passo successivo. Altrimenti, dovrai staccare la batteria dal case posteriore.

Prepara un iOpener e applicalo sul retro del case posteriore, direttamente al di sopra della batteria. In alternativa puoi riscaldare la parte usando una pistola termica o un asciugacapelli.

Dopo un minuto circa rimuovi l'iOpener, rovescia il telefono e usa una scheda di plastica per rompere l'adesivo rimasto sotto la batteria.

Evita di piegare la batteria. Il danneggiamento della batteria può provocare il rilascio di sostanze chimiche pericolose e può causare un incendio.

Non forzare sotto il terzo superiore della batteria, perché potresti danneggiare il cavo a nastro dei controlli del volume.

[* icon_note] If you successfully removed both adhesive strips, move on to the next step. Otherwise, you will need to pry the battery from the rear case.
[* black] [guide|25705|Prepare an iOpener|new_window=true] and apply it to the back of the rear case, directly over the battery. Alternatively, you can apply heat using a heat gun or hair dryer.
-[* black] After about a minute, remove the iOpener, flip the phone over and use a plastic card to break up any remaining adhesive behind the battery.
+[* black] After about a minute, remove the iOpener, flip the phone over and use a [product|IF145-101|plastic card] to break up any remaining adhesive behind the battery.
[* icon_caution] Avoid bending the battery. Damage to the battery may release dangerous chemicals, and could start a fire.
[* icon_caution] Do not pry under the top third of the battery, you may damage the volume button ribbon cable.

Ваш вклад лицензируется под свободной лицензией Creative Commons .