Перейти к основному содержанию
/
Мой рабочий стол для верстки руководств

Получите быстрый доступ к руководствам, запчастям и ответам касательно ваших устройств

Rimozione batteria per accedere al cavo di accensione e controllo volume nell'iPhone 7

Примечание: Вы редактируете необходимое руководство. Любые внесенные вами изменения повлияют на руководство, которое включает эту стадию.

Английский
Итальянский
Шаг 7
iPhone 7 Power and Volume Control Cable Battery Replacement: шаг 0, изображение 1 из 1
  • Repeat the previous step for the second strip.

  • Hold down the battery as you remove the second strip, or the strip may fling the battery when it separates from the case.

  • If you removed both adhesive strips successfully, skip the next step.

  • Otherwise, if either of the adhesive strips broke off underneath the battery and could not be retrieved, continue with the next step below.

Ripeti il passo precedente per la seconda striscia.

Tieni premuta la batteria sul fondo del telefono mentre rimuovi la seconda striscia, altrimenti la batteria potrebbe volare via appena si separa dal case.

Se hai rimosso con successo entrambe le strisce adesive, salta il passo successivo.

In caso contrario, se una delle strisce adesive si è rotta sotto la batteria e non può essere recuperata, continua con il prossimo passo.

Ваш вклад лицензируется под свободной лицензией Creative Commons .