cannot get my system to reboot

Question

eMachines 2220

eMachines 2220 desktop computer.

2вопросов Показать все

Вопрос закрыт

john pullar @johnpullar

Репутация: 1

1

Опубликовано: 7 апр 2010 г.

Опции

cannot get my system to reboot

Hi there,i purchased the above system in the uk 5years ago. after the power supply blew and fried the motherboard i got both replaced,recently i done a system restore and the system would not reboot,showing the message

/Windows/system32config/windows file is missing or corrupt.

it says i may be able to repair it by running the set-up media that i recieved with my purchase but i cannot find my original set-up media. is there any way that i can get the system back working or will i have to purchase a new copy of

WINDOWS XP.

YOURS JOHNNYP

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 0

Добавить комментарий

7 Ответов

Выбранное решение

rj713 @rj713

Репутация: 78,2к

385

96

162

Опубликовано: 7 апр 2010 г.

Опции

Contact eMachines and see if they will sell you a copy of the original setup disk. If they won't buy a OEM copy of XP with a new COA and install that. Ralph

Был ли этот ответ полезен?

Да Нет

Оценка 3

1 Комментарий:

thanks for your answer.will try as suggested

7 апр 2010 г. из john pullar

Добавить комментарий

Frank @frank8492 Репутация: 1 · Answer 1 · 2011-07-24T16:06:18-07:00

Frank @frank8492

Репутация: 1

Опубликовано: 24 июл 2011 г.

Опции

I've come across a number of 2220 boards and many Dell boards that were populated with defective Rubycon electrolytic caps. Recapped 16 such boards already and now they work just fine.

Look at the motherboard very closely with a flashlight and see if any of the caps are swollen on the top where that "X" is cut into the top. Some may pop out the bottom. If any look like that then I suspect the board is defective.

The 1800 ufd 6.3 vdc caps are notoriously suspect. They were counterfeits as well as other values on the board.

Был ли этот ответ полезен?

Да Нет

Оценка 0

1 Комментарий:

great advise and excellent repair, but the repair on this particular one was strictly software related.

24 июл 2011 г. из oldturkey03

Добавить комментарий

Fred @fred38371 Репутация: 13 1 · Answer 2 · 2012-02-19T11:13:35-07:00

Fred @fred38371

Репутация: 13

1

Опубликовано: 19 фев 2012 г.

Опции

You can attempt to do a system recovery (it will reset the computer to factory specs) from the boot menu. Here is a link to a website that will give you step by step instructions. I hope this helps.

http://www.ehow.com/how_6904280_do-syste...

Был ли этот ответ полезен?

Да Нет

Оценка 0

2 Комментариев:

Good answer to an almost 2 year old question.:)

19 фев 2012 г. из oldturkey03

Thank you for your response.

19 фев 2012 г. из Fred

Добавить комментарий

Fred @fred38371 Репутация: 13 1 · Answer 3 · 2012-02-19T20:10:21-07:00

Fred @fred38371

Репутация: 13

1

Опубликовано: 19 фев 2012 г.

Опции

Thank you for your response.

Был ли этот ответ полезен?

Да Нет

Оценка 0

Добавить комментарий

genesysjgb @genesysjgb Репутация: 1 · Answer 4 · 2012-08-30T10:29:55-07:00

genesysjgb @genesysjgb

Репутация: 1

Опубликовано: 30 авг 2012 г.

Опции

If you have access to another PC with a CD/DVD burner download a copy of the Ultimate Bootdisk and copy the ISO file to a CD. Botup from that CD and use one of the HD diagnostics to test the HD first to be sure the HD isn't fried before you invest in the oem or the system dsiks from emachines.

Был ли этот ответ полезен?

Да Нет

Оценка 0

Добавить комментарий

Spacer @velojym Репутация: 98 5 1 · Answer 5 · 2013-03-06T07:24:59-07:00

Spacer @velojym

Репутация: 98

5

1

Опубликовано: 6 мар 2013 г.

Опции

I got my late Mom-in-Law's "e" computer with a startup issue. The caps are fine, and my Linux live disks are working in it fine. The Ultimate Bootdisk mentioned above would have the same effect, with the advantage of having the diagnostic tools readily available.

Был ли этот ответ полезен?

Да Нет

Оценка 0

Добавить комментарий