Need to know differences between iPad 3 and 4 PCB(interconnection)

Question

iPad 4 GSM

GSM version of the fourth generation of iPad released November 2, 2012. Model Number A1459 / 16, 32, or 64 GB

43вопросов Показать все

David @david87526

Репутация: 1,5к

5

6

1

Опубликовано: 31 дек 2013 г.

Опции

Need to know differences between iPad 3 and 4 PCB(interconnection)

Does anyone know differences between iPad 3 and 4 PCB(interconnection) board? I am looking around and have only been able to find the interconnection board for the iPad 3 wifi, I need an interconnection board for the iPad 3 Cellular GSM. The only one I have found seems to be dual listed to work in the iPad 4 as well. I have trouble believing that.

On the cellular version one of the antennas plugs into this board.

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 0

Добавить комментарий

2 Ответов

Tom Chai @tomchai Репутация: 73,8к 19 111 82 · Answer 1 · 2013-12-31T10:35:03-07:00

Наиболее полезный ответ

Tom Chai @tomchai

Репутация: 73,8к

19

111

82

Опубликовано: 31 дек 2013 г.

Опции

Interconnection board? you mean the headphone jack board maybe?

Был ли этот ответ полезен?

Да Нет

Оценка 1

3 Комментариев:

The headphone jack is soldered to this board. The antennas plug into it as well as the power buttons.

31 дек 2013 г. из David

It is the sensor panel assembly, it houses the headphone jack, front camera/ALS, mic, gyro/accelerometer, rear camera, front end modules for one of the antenna, buttons and compass sensor. A lot of ipad3/4 parts are interchangeable, this could be one of them. I don't have the schematics for iPad 4 so I can't say for sure.

31 дек 2013 г. из Tom Chai

Okay thank you.

2 янв 2014 г. из David

Добавить комментарий