Phillips # 000 screwdriver did not fit in replacing fan.

Question

MacBook Pro 13" Retina Display Late 2013

Model A1502 / 2.4, 2.6, or 2.8 GHz dual-core Intel processor / Released October 2013

Репутация: 1

1

Опции

I bought the 64 Bit Driver Kit that you sell.

It proceeded to repair the way that you introduce.

in step#9, Phillips # 000 screwdriver did not fit in replacing fan.

I bought a 64bit driver kit, and it says that there is a Phillips # 000 screwdriver.

Any screwdriver inside it could not be repaired.

If I knew in advance that this driver set would not be repairable, I would not have bought it.

I want to hear you opinion.

thank you.

mail : changho.park79@gmail.com

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 0

Выбранное решение

Репутация: 1

1

Опции

Thanks for the answer.

but, If you look at step9 of the video you sent,

Red : Four 2.6 mm T5 screws

orange : One 2.4 mm Phillips #000 screw.

I can not find " 2.4 mm Phillips # 000 screw" in 64bit driver kit

Is there a 2.4 mm Phillips # 000 screw in the 64bit driver kit?

Был ли этот ответ полезен?

Да Нет

Оценка 0

1 Комментарий:

Yes, there is a #000 screwdriver in that set. If you are missing it, I would recommend contacting iFixit directly here http://help.ifixit.com/category/133-cont...

Yes, there is a #000 screwdriver in that set. If you are missing it, I would recommend contacting iFixit directly here http://help.ifixit.com/category/133-cont... — Reece