32 GB iPod Touch smashed screen/digitizer. Replaced; LCD now dead.

Question

iPod Touch 3rd Generation

Model A1318 / 32 or 64 GB capacity

299вопросов Показать все

Pat O @pato62382

Репутация: 131

3

4

Опубликовано: 5 янв 2011 г.

Опции

32 GB iPod Touch smashed screen/digitizer. Replaced; LCD now dead.

My husband dropped his iPod Touch (32 GB) while working out on treadmill. Smashed screen and digitizer but could still see the LCD homescreen and notifications. I replaced it with this http://www.amazon.com/gp/product/B0049PQ... which is a pre-assembled glass/digitizer/chassis bezel. This seemed to go well, but now there is no picture at all. I thought perhaps it needed charging so I plugged it in for several hours - still nothing. When I plug it in, it does "sound" like it's connecting to a charge, and when I plug it into his iTunes account it says it is updating his iPod. Still nothing shows on the iPod screen. Please help!

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 1

1 Комментарий

Looking closely, I see that under the ribbon connection in the upper left corner of the iPod Touch screen, one of the "teeth" on the connection is missing. I do not know if this is part of the motherboard and/or if this missing tooth basically makes the iPod unfixable. Does anyone have an answer to this? Thanks!

11 янв 2011 г. из Pat O

Добавить комментарий

1 ответ

Выбранное решение

Marc @marc92711

Репутация: 1,9к

Sno-King Affordable iPod Repair

9

1

3

Опубликовано: 5 янв 2011 г.

Опции

During the digitizer replacement you must have accidentally unplugged the LCD. You should be able to reuse the safe opening tools to reopen, plug the LCD back in and snap the digitizer back on (after plugging it in as well of course) follow the instructions found within ifixit and you should be back in business im short order.

Был ли этот ответ полезен?

Да Нет

Оценка 2

9 Комментариев:

Thank you so much, Marc, for your quick response. I have to figure out now how to plug in the LCD. Do you have a link for that? Bless you!

6 янв 2011 г. из Pat O

The link to re assemble is:

iPod Touch 2nd Generation Display Replacement

6 янв 2011 г. из Marc

So I guess this would be the same for the 32GB 3rd generation then, right? Thanks again.

6 янв 2011 г. из Pat O

Pat O since yours is listed as a 3rd Generation, here are the instructions.iPod Touch 3rd Generation Display Replacement and yes this goes for all 3rd gen regardless of storage space 32 or 64 same instructions. Good Luck

7 янв 2011 г. из oldturkey03

Thank you so very much!

7 янв 2011 г. из Pat O

Показать 4 больше комментариев

Добавить комментарий

Looking closely, I see that under the ribbon connection in the upper left corner of the iPod Touch screen, one of the "teeth" on the connection is missing. I do not know if this is part of the motherboard and/or if this missing tooth basically makes the iPod unfixable. Does anyone have an answer to this? Thanks! — Pat O
Thank you so much, Marc, for your quick response. I have to figure out now how to plug in the LCD. Do you have a link for that? Bless you! — Pat O
The link to re assemble is:

iPod Touch 2nd Generation Display Replacement — Marc
So I guess this would be the same for the 32GB 3rd generation then, right? Thanks again. — Pat O
Pat O since yours is listed as a 3rd Generation, here are the instructions.iPod Touch 3rd Generation Display Replacement and yes this goes for all 3rd gen regardless of storage space 32 or 64 same instructions. Good Luck — oldturkey03

iPod Touch 3rd Generation

32 GB iPod Touch smashed screen/digitizer. Replaced; LCD now dead.

1 ответ

Добавьте свой ответ