Репутация: 11
1
1
I repaired an iPad 2 by replacing a digitizer before peeling back the adhesive strips I tested it. The new digitizer it will not respond to touch. I made sure all of my ribbon cables were connected properly and it still won’t respond to touch.
Это хороший вопрос?
Репутация: 159,7к
11
191
368
Chances are the digitiser is faulty if you tried testing it before installation. As you said you have fully plugged in the digitizer ribbon cable.
Был ли этот ответ полезен?
Thank you for your advice. I have solved my problem. I really appreciate your advice in solving my problem.
За последние 24часов: 0
За последние 7 дней: 0
За последние 30 дней: 1
За всё время: 48
