Why won't my Mac start up after Sierra update?

Question

MacBook Pro 13" Retina Display Late 2012

2.5 GHz dual-core Intel Core i5 processor (Turbo Boost up to 3.1 GHz) with 3 MB shared L3 cache.

265вопросов Показать все

Hannah Jay @hannahjay

Репутация: 1

Опубликовано: 3 фев 2018 г.

Опции

Why won't my Mac start up after Sierra update?

I did not want to update to Sierra (Yosemite was running just fine) but Adobe Premiere refused to run without it.

Now the laptop will not startup. At first, I had a progress bar on the loading screen that stalled and continued stealing overnight. Now, it keeps attempting to boot up but not getting far.

Lots of code is on the screen. I'm not a programmer. Any idea what this means?

Edit: pressing shift to enter safe mode does nothing. When pressing option, this screen comes up. But clicking anywhere just brings my right back to code startup screen.

>:(

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 0

2 Комментариев

Here's how to add stuff: Adding images to an existing question

3 фев 2018 г. из Dan

Edit: added image thank you Dan!

3 фев 2018 г. из Hannah Jay

Добавить комментарий

1 ответ

Выбранное решение

mayer @mayer

Репутация: 685,3к

MacHale Enterprises

3,4к

1,1к

2,6к

Опубликовано: 3 фев 2018 г.

Опции

First see if it will boot in Safe Mode by holding down the Shift key on boot.

Boot up to the repair partition by holding down the Option key on start up. Go to Disk Utilities and see if the Disk can be repaired. Try booting again. If it fails do a reinstall from the repair partition.

Был ли этот ответ полезен?

Да Нет

Оценка 2

2 Комментариев:

The shift on start up does nothing, I already tried that. I tried option. It does bring up a different screen, one with a picture of Macintosh HD. There is only an up arrow to click on, but this brings me right back to the code on startup screen.

3 фев 2018 г. из Hannah Jay

Yuck. We need to boot it from an external source. Either from your back-up drive (you do have a back-up drive? Or in Target Mode from another Mac and do a full reinstall and virus check.

3 фев 2018 г. из mayer

Добавить комментарий

Here's how to add stuff: Adding images to an existing question — Dan
The shift on start up does nothing, I already tried that. I tried option. It does bring up a different screen, one with a picture of Macintosh HD. There is only an up arrow to click on, but this brings me right back to the code on startup screen. — Hannah Jay
Yuck. We need to boot it from an external source. Either from your back-up drive (you do have a back-up drive? Or in Target Mode from another Mac and do a full reinstall and virus check. — mayer

MacBook Pro 13" Retina Display Late 2012

Why won't my Mac start up after Sierra update?

1 ответ

Добавьте свой ответ