Репутация: 13
1
1
I ordered a replacement battery from ifixit and changed the battery following the instructions provided on the website. After changing the battery the phone no longer vibrates? I have reseated the connector for the taptic engine but still no vibration. Is there anything else I can try to fix the problem?
Это хороший вопрос?
Репутация: 1,8к
3
When you turn the phone on how long does it take to boot up?
Does your home button work properly including Touch ID?
Does the vibrate work with the home button?
Is the charge port flex correctly seated?
Also check the front cam and earpiece for functionality.
Был ли этот ответ полезен?
Boot up - 24 seconds
Home button works including touch id
Vibrate does not work with home button
Not sure about the charge port flex but it charges
Front cam works
Headphones work with adapter in charge port
Replaced taptic engine with new taptic engine and still does not work
Tried testing with phone open and still didnt work
All other functions work
Репутация: 1,8к
3
Could try hanging a new charge port in with taptronic attached to eliminate charge port flex. If you have parts I would also try volume ribbon and front cam but it sounds board level repair.
Был ли этот ответ полезен?
Ok thks. I guess i’ll just go buy a new phone. Seems beyond repair.
Репутация: 13
1
You probably damaged the small wire in the ribbon cable of the charging port or tore the haptic engine flex cable when pulling the battery. Change the charging port or Taptic Engine you’d issue.
Был ли этот ответ полезен?
За последние 24часов: 2
За последние 7 дней: 5
За последние 30 дней: 11
За всё время: 2,250
Does it vibrate at all? Like when you toggle the ringer switch? If I had to guess, I'd say you might've killed the taptic engine.
из Reed Crosby
Try reseating it
из Robert Hayek