Western Digital My Passport

Western Digital My Passport Drive. USB 3.0 Portable External Hard Drive.

73вопросов Показать все

gautam jotkar @gautu

Репутация: 1

Опубликовано: 10 июл 2018 г.

Опции

My passport not appearing in Windows explorer, fails initializing.

My passport does not get detected. I tried to do the following but no success.

1. Install drivers from WD website --> drivers installation successful --> HDD not detected

2. Check the drive in Disk management --> Disk initialization failure --> I/O issue

3. Check the drive on Ubuntu --> Drive is listed in ls command --> drive space details are available --> cannot access the data

4. Use the PCB from another 'My passport'--> with faulty disk unit --> still drive not detecting.

Can anyone support me to resolve the issue? For me, the data is very important and needs to be recovered.

Regards

Gautam

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 0

Добавить комментарий

4 Ответов

Наиболее полезный ответ

Репутация: 449,1к

11

366

1,4к

Опубликовано: 11 июл 2018 г.

Опции

This link may be of some interest to you.

WD my passport ultra 2TB is not showing up on explorer..

Был ли этот ответ полезен?

Да Нет

Оценка 3

1 Комментарий:

So there is a firmware update for the drive to solve this!

Clearly a strange issue! That a partial insertion of the USB plug would make the difference. WD Software & Downloads

11 июл 2018 г. из Dan

Добавить комментарий

Репутация: 685,3к

MacHale Enterprises

3,4к

1,1к

2,6к

Опубликовано: 11 июл 2018 г.

Опции

I would put the drive in another enclosure and give it a try.

Был ли этот ответ полезен?

Да Нет

Оценка 2

2 Комментариев:

Hello Mayer,

I tried to use the controller board (PCB) of another HDD of the same model. But still, it doesn't get detected.

11 июл 2018 г. из gautam jotkar

No, pull the drive and put it in another external box.

12 июл 2018 г. из mayer

Добавить комментарий

Репутация: 479,4к

Self employed contract worker

35

329

971

Опубликовано: 11 июл 2018 г.

Опции

Sounds like the disk its self has failed. Best thing here if you need the data is to send the drive off to a data recovery service like DriveSavers

Был ли этот ответ полезен?

Да Нет

Оценка 1

Добавить комментарий

Репутация: 4,1к

3

2

Опубликовано: 12 июл 2018 г.

Опции

There are 2 levels of "availability" for drives. If you see the drive but cannot access it, the controller card on the drive is functioning. This does not require actual access to the drive. Think of this as looking into a garage and seeing a car. Yep, its there... No need to know whether or not the car works at this point.

Next is gathering information about the drive. This can be done as that info is often in the controller too. If not, then the "home" position of the drive usually contains this information and can be read. Any additional functions require the drive to actually function (heads move, data read etc.)

From your description, I would guess that the drive has failed and that you are "seeing the car, but not starting it" This is not a failure of the carrier, but of the drive itself. Data recovery is likely the only choice here to save the data.

Dan

Был ли этот ответ полезен?

Да Нет

Оценка 1

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 1

За всё время: 8,353