Перейти к основному содержанию

1.6 or 1.8 GHz dual-core processor, 2 GB or 4 GB of SDRAM, 64 GB or 128 GB SSD

192вопросов Показать все

MacBook got wet, backlight LED not working, help!

Hi All,

Thank you for reading this. My backlight LED stopped working after my water bottle spilled all over my laptop. It hooks up to an external monitor just fine. Flashlight through the apple symbol shows the display. I found this answer which has helped me figure out what the issue is: MacBook backlight not working - display or backlight ic?

Now I need to know how to fix it. What am I looking for? How do I replace it? What parts do I need?

I've replaced an expanding battery before on my macbook pro so I feel like I can figure this out I just need a little help.

Thank you so much!

E.

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 0
Добавить комментарий

1 ответ

Наиболее полезный ответ

@mneliz the best thing to do at this time would be to take a look at the logic board and evalaute it for corrosion and obvious damage. It appears that your backlight is not working which could be due to a short on the backlight circuitry, a bad fuse, a bad controller IC or a corroded connector and many things in between. Use this guide MacBook Air 11" Mid 2011 Logic Board Replacement to get to the board and use this guide Adding images to an existing question to post some good images of what you find with your question. That way we can see what you see.

MacBook Air 11" Mid 2011 Logic Board Изображение

Инструкция

MacBook Air 11" Mid 2011 Logic Board Replacement

Сложность:

Сложно

1 hour

iFixit Изображение

Инструкция

Adding images to an existing question

Сложность:

Очень просто

2 - 5 minutes

Был ли этот ответ полезен?

Оценка 2
Добавить комментарий

Добавьте свой ответ

Elizabeth будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 2

За всё время: 66