iPhone 6 screen compressed

This is usually caused by pushing down the back metal plate too much against the screen when tightening the screws. To mitigate this issue usually you just loosen the screws a bit or readjust the back metal plate.

The top left near the volume buttons and silent switch is a common spot for a gap to between the screen and the iPhone housing, mostly due to aftermarket screens having thicker plastic frames.

Был ли этот ответ полезен?

Да Нет

Оценка 4

5 Комментариев:

Yes you are right, in my case I did not go up the metal frame.

And yes the screen is actually more thick. Screens OEM one he centres him too thick also ? Or they keep the frame of origin ?

21 авг 2018 г. из Yorane Duflos

For suppliers that stock OEM grade screens I would assume their frames are more thinner.

iPhone screen frames aren't really reusable due to how they are made which is mostly plastic and a thin frame so a new frame is used instead.

21 авг 2018 г. из Ben

All right, you have already used screens OEM? If yes you find a big difference with the frames of origins?

21 авг 2018 г. из Yorane Duflos

Yes, it is generally the refurbished screens that are closest to original.

I'm using aftermarket for now because I've been able to get hold of a supplier that has iPhone screens with frames not too thick.

It's a local supplier though in Australia so I don't have much more info than that.

21 авг 2018 г. из Ben

I am thus going to try the quality OEM, it is enough of to find a supplier with a constant quality.

Thank you very much of your information she(it) helps me to move forward

23 авг 2018 г. из Yorane Duflos

Добавить комментарий

Yes you are right, in my case I did not go up the metal frame.

And yes the screen is actually more thick. Screens OEM one he centres him too thick also ? Or they keep the frame of origin ? — Yorane Duflos
For suppliers that stock OEM grade screens I would assume their frames are more thinner.

iPhone screen frames aren't really reusable due to how they are made which is mostly plastic and a thin frame so a new frame is used instead. — Ben
All right, you have already used screens OEM? If yes you find a big difference with the frames of origins? — Yorane Duflos
Yes, it is generally the refurbished screens that are closest to original.

I'm using aftermarket for now because I've been able to get hold of a supplier that has iPhone screens with frames not too thick.

It's a local supplier though in Australia so I don't have much more info than that. — Ben
I am thus going to try the quality OEM, it is enough of to find a supplier with a constant quality.

Thank you very much of your information she(it) helps me to move forward — Yorane Duflos

iPhone 6

iPhone 6 screen compressed

1 ответ

Добавьте свой ответ