detached the female 3 pin connector on Garmin Edge 800

Hi @odonovj ,

Can’t find the connector but was wondering if it may be possible to solder the battery wires directly onto the terminals at the back of the male connector on the motherboard or remove the male connector from the motherboard and solder the wires directly onto the motherboard itself

Below is an image taken from a Garmin Edge 800 battery replacement video showing the wiring colours to the female connector. This should help denote the order in which they should then be terminated onto the board.

(click on image to enlarge for better viewing)

Just an idea if you can’t find a suitable connector.