connector for digitizer cable damaged 7 require to replace
I would like to know whether it is possible to replace connector for digitizer cable no. 3
Это хороший вопрос?
Оценка
0
54794
3 Ответов
Выбранное решение
Репутация: 7,4к
15
5
10
You CAN replace the connector on the board, it isnt impossible. It isnt related to the digitizer though, this is for the ear speaker and proximity sensor. the ribbon replacement isnt going to be detailed in that link. If you want to replace the ribbon, look here:
iPhone 3GS Proximity Sensor Ribbon Replacement
There is no detailed guide to replace the #3 connector because the tools required are quite specialized. You asked about #7 as well? The title of the question and the content is a bit confusing.
Был ли этот ответ полезен?
Оценка
2
Репутация: 43
3
1
1
If you want to change the ribbon try here:
[связанный продукт отсутствует или отключен: IF142-003]
But the locking mechanism (FPC tab) on the board I don't believe you can change out
just go fresh and keep steady, number 3 was a pain for me too
Был ли этот ответ полезен?
Оценка
1
http://fonefixer.webs.com/apps/webstore/...
is the fix for the number 7 connector and missing inductor.
Был ли этот ответ полезен?
Оценка
0
