Перейти к основному содержанию

{A1706 / EMC 3071}—Released in June 2017, this 13" Macbook Pro features Kaby Lake processors up to 3.5 GHz Core i7 with Turbo Boost up to 4.0 GHz.

224вопросов Показать все

Should the fans run all the time on a 820 00239

I got sent a mac which had the U5860 temp sensor torn off along with all the pads on the board. It would take ages to boot if at all and the fans where spinning flat out. I turtled the chip, ran 9 jumpers, masked the chip and jumpers and installed the board back into its housing. I have tried all the resets.

·         The mac boots straight up but the fans do not spin

·         When I run the diagnostic check it will spin each fan separately

·         The diagnostic results show no problems detected.

We live in a cold climate I have tried playing YouTube videos to get the fans to spin but they don’t. The CPU doesn’t feel extremely hot. Am I missing something or is it normal on these newer macs?

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Оценка 1
Добавить комментарий

1 ответ

Выбранное решение

Unless you are located on Antarctica right now, your not is a cold enough climate to worry about SMC and the thermal sensors ;-}

What does TG Pro tell you? Post a snapshot of the main window (you'll need to resize it to get everything in) Adding images to an existing question

Был ли этот ответ полезен?

Оценка 1


Thanks Dan. TG-PRO displayed a message saying. “This model of mac will safely turn the fans off when the CPU is running at low capacity.” That’s all I wanted to know.


@imicrosoldering - Thats good! Sounds like you good to go! Don't forget to accept the answer.


Добавить комментарий

Добавьте свой ответ

Chris Stables будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 3

За всё время: 232