Репутация: 1
1
Hello,
I replaced my water filter today and since then the door alarm buzzer won’t stop going off. It keeps beeping even after resetting the alarm. After a minute the console says ‘Fd’. Not sure what the problem is.
I already tried unplugging the fridge from the back for more than a minute but that did not fix it. Any ideas?
Это хороший вопрос?
Репутация: 457,8к
11
370
1,4к
It may be in software so maybe you can't, unless you find the speaker (control board?) and disconnect it permanently from the board ;-).
There is this option to temporarily mute the alarm.
Hopefully it is applicable to your particular model.
Был ли этот ответ полезен?
Репутация: 457,8к
11
370
1,4к
Hi @deepsingh ,
Try manually operating the door switches a few times in case they're not working properly.
The lights should go off if you operate them with the door open.
Not sure with your model but they should be in the door jamb somewhere.
Hi @deepsingh ,
Unless a better answer comes along beforehand, you might want to consider purchasing the service manual. Given the cost it may be a worthwhile investment
Был ли этот ответ полезен?
Hey @jayeff . Thanks for your reply. Yes, the door switches work (I manually operated them and the light does turn off). However, the issue is still occurring.
За последние 24часов: 1
За последние 7 дней: 5
За последние 30 дней: 16
За всё время: 528
1 Комментарий
My similar issue:
I can't disable the door alarm. I resent the beeping every time that I have the door open for more than, say, thirty seconds.
I'm not feeble or, even, forgetful: I >know< that the door is open and that it's better for the fridge to close it >soon<. But my definition of 'soon' and GE's are different. I want the freedom to open and close it at the interval of my choosing.
How can I make my fridge beepless?
из Peter Pullman