Перейти к основному содержанию

Released December 3, 1994 in Japan and September 9, 1995 in North America. Models SCPH-100x, SCPH-3000, SCPH-3500, SCPH-500x, SCPH-550x, SCPH-700x, SCPH-750x, and SCPH-900x.

Вопросов 73 Показать все

Accidentally tore off optical drive power supply cable socket

While doing repairs I realized I had torn off the optical drive power supply cable socket from the motherboard. That's the white plastic thing with the metal parts. The metal pins are intact. Should I solder then back on? If so, do you have any tips?

Block Image

Block Image

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 0

1 Комментарий:

@voidemissary post some good pictures with your QUESTION showing what the damage looks like.

Adding images to an existing question

из

Добавить комментарий

Ответов (1)

I can’t see if the solder pads on the board are damaged or not, from the look of the pins you should be fine.

It won’t be a difficult job but always practise first if you aren’t sure of your abilities. Use a small amount of solder to help reflow the existing solder on the pins.

Был ли этот ответ полезен?

Оценка 0

2 Комментариев:

Should I add solder to the pins or the board? And should I add solder to the sides of the plastic socket where the broken off metal is?

из

Sorry, haven't logged in in a while.

Small amount of solder to everything I think, but just enough to leave a very small coat. Solder the metal at the sides, that could be an earth connection.

из

Добавить комментарий

Добавьте свой ответ

Egg будет очень признателен(а).
Статистика просмотров:

За последние 24 час(ов): 0

За последние 7 дней: 1

За последние 30 дней: 1

За всё время: 72