Перейти к основному содержанию
Присоединяйся к сообществу ремонтников - Создай аккаунт

Model A1059 or A1099 / 20, 40, or 60 GB hard drive / touch sensitive click wheel

interface port on iPod

My friend leaves his ipod classic plugged into his stereo in his truck at all times. It has been bumped a few times and the cable no longer makes a good connection all the time. Is there a way to reinforce the port on the logic port so it will not fail?

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Счет 0
Добавить комментарий

1 ответ

Выбранное решение

If the cable is loose at the bottom of the iPod, the dock connector, then there is really not a lot that you can do. The little spring pins may just have worn out. I would try a new cable and see if that makes better contact. The only way to fix the dock connector is by replacing the logic board. Not a terribly expensive or difficult undertaking.

Был ли этот ответ полезен?

Счет 1
Добавить комментарий

Добавьте свой ответ

Matt Shirey буду вечно благодарен.
Статистика просмотров:

За последние 24 часов: 0

За последние 7 дней: 1

За последние 30 дней: 4

За всё время: 520