Перейти к основному содержанию

Google's third-generation Pixel-branded smartphone, and their first "notched" phone. Comes with a 6.3" QHD+ OLED display and 64 or 128 GB of storage. Available in Nearly White, Just Black, or Not Pink.

77вопросов Показать все

Screen stopped working after charging assembly replacement

Hi,


My phone stopped charging using the USB-C port on my phone so I replaced it then it started working again. After some time the port stopped working again so I took the phone apart again, when I did I found that the black cable was loose which I fixed. I tried to turn on the phone again but the phone is not turning on again. It’s also worth noting that my computer is displaying a “USB Device not Recognized” when connecting to a PC. Do I give up and get a new phone?

Thank you

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 0
Добавить комментарий

1 ответ

There may have been the possibility of you damaging the display while attempting the second repair or at leas the display connector. Take it apart and make sure the display is connected. If a computer is at least detecting it, I would imagine the phone is at least booted up to the lock screen. I would plug it into a computer to make sure it’s detected and then attempt to call it, assuming you left it on ring or at least put it on vibrate. But even then if the phone rings on the other line rather than sending it straight to voicemail, it can confirm the phone is at least powered on, booted up, and it just needs a new screen.

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

Добавьте свой ответ

Moya Alhayek будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 3

За всё время: 48