I just replaced the battery in my old Surface Pro 4. After reassembly, the device powers up and the backlight comes on, but nothing comes up on the display. I have connected it to an external monitor and confirmed that it is booting to the OS. I have also confirmed that the touch functionality is still working, by mirroring the main display with the external.
Это хороший вопрос?
Репутация: 11,4к
7
5
1
If I’m not mistaken, when you disconnect and reconnect the battery in certain surface models, it blows a fuse for the image circuit. That or you could’ve damaged the display.
Был ли этот ответ полезен?
Репутация: 345
16
2
1
Have a detailed look at the connector under the microscope. I‘ve had no touch and found a stucked pin inside the connector on the board. Maybe this is the same with your connector.
Был ли этот ответ полезен?
Репутация: 109
4
2
Did you solve your problem?
I'm having the same issue, i get a subtle backligth but no image. Maybe related to a damaged ribbon flex cable?
Был ли этот ответ полезен?
За последние 24часов: 0
За последние 7 дней: 0
За последние 30 дней: 1
За всё время: 78
