Перейти к основному содержанию

The Kenmore Elite HE3 is 7.2 cu. ft. capacity electric dryer by Kenmore.

319вопросов Показать все

Dryer runs, no heat. Thermal Fuse ok. Gas dryer.- RESOLVED

Dryer runs, no errors. No heat, and no error codes.

Tested thermal fuse with a multi-meter, and it looks fine.

There is some slightly toasted lent at the bottom, but not a fire.

Are there guides for troubleshooting the gas solenoid or the igniter ?

Thank You

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 0
2 Комментариев

Hi @garose ,

What is the model number of the dryer?

из

The model number is 110.94821300

Type:  DADT-NAT-1206006-EL22

Thank you

из

Добавить комментарий

2 Ответов

Наиболее полезный ответ

Hi @garose ,

Here's a video that shows how to test an ignitor in a dryer

The tech sheet for the dryer is Whirlpool part # LIT 8557311 but unfortunately I can't find it online. Having this would give the schematics and also the diagnostics, that would be more help.

Был ли этот ответ полезен?

Оценка 1
Добавить комментарий

Figured it out.

There were enough spiderwebs inside, that it restricted fresh air flow.

So the flame from the burner was not pulling far enough down the draw tube to not land on the thermal sensor above the ignitor.

It was a fine layer of webs, so I just didn't notice them at first. But once wiped away, it works well once again.

Thanks for the help, sincerely !

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

Добавьте свой ответ

Garry будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 1

За последние 30 дней: 3

За всё время: 139