Scroll through this thread to find the appropriate place for this comment. Then, click "Attach comment to this post" to move it.
3 Комментариев:
This is one of those jobs where the pictures aren’t high enough quality I’m afraid. Also one where a microscope is really needed. I see one trace going to the vias plus what looks like a burn between the two. also if it’s a multi layer board then more connections could be shorted or damaged. Something has blown causing that damage. It’s possible it might be un repairable.
This is one of those jobs where the pictures aren’t high enough quality I’m afraid. Also one where a microscope is really needed. I see one trace going to the vias plus what looks like a burn between the two. also if it’s a multi layer board then more connections could be shorted or damaged. Something has blown causing that damage. It’s possible it might be un repairable.
из [deleted]
@hasbanshakil consider cleaning your board of all the soldier and burn residue. Then repost some good clear straight-on pictures of the damaged area.
из oldturkey03
Can you make me an alternate of its print lines like jumpers
из Hasban ur Rehman