Перейти к основному содержанию

The PlayStation 3 (or commonly known as the PS3) is the third home computer entertainment system produced by Sony Computer Entertainment, and the successor to the PlayStation 2. It was released November 11, 2006

727 Questions Показать все

Is it ok to set my heat gun to 250C to fix the YLOD?

I have a heat gun, but I don't know which the temperature is right because it has the temperature from 250C to 450C. Can you please help me?

Thanks.

Отвечено! View the answer У меня та же проблема

Это хороший вопрос?

по рейтингу 0
Добавить комментарий

3 Ответов

Выбранное решение

Yellow Light of Death Repair read step 44 and 45...

Был ли этот ответ полезен?

по рейтингу 1
Добавить комментарий

I recommend 250C

Был ли этот ответ полезен?

по рейтингу 0
Добавить комментарий

Not just okay, but a definite must. Remember that you must reach adequate temperature on the solder joints itself. Keep in mind that the distance to the solder will decrease the temperature and keep the length of time of exposure in mind as well. Use the attached images of a reflow profile as a guide. There is also great information in this document. Here and and here as well are good writeups about how to reflow. Hope this helps, good luck.

Block Image

Block Image

:-) or just follow the link suggested by my colleague pollytintop :-)

Был ли этот ответ полезен?

по рейтингу 0
Добавить комментарий

Добавьте свой ответ

amsafwat87 будет вечно благодарен.
Просмотр статистики:

За 24 часа: 1

За 7 дней: 1

За 30 дней: 3

За всё время: 1,211