Does anyone have advice for repairing optical drives. I have one that sometimes reads a disk but if I try to burn a disk I get errors. I work in an e-cycle plant and we get quite a bit of them and repairing seems like a better option than just replacing.
Это хороший вопрос?
Репутация: 835,5к
1,3к
940
2,4к
@jerrywitherite most common failure for something that you describe would be a weak laser. Sometimes increasing the voltage to the laser slightly by adjusting the trimpots (never do that without a meter or you could burn it out). Ultimately replacing the laser would be the only real fix.
Был ли этот ответ полезен?
Репутация: 41
2
they are so cheep. throw it away and try another.
Был ли этот ответ полезен?
@altonbell40070 the iFixit community frowns upon throwing stuff out just because "they are so cheep". Check on here https://www.ifixit.com/Right-to-Repair to see what this is all about.
За последние 24 часов: 0
За последние 7 дней: 3
За последние 30 дней: 14
За всё время: 122
1 Комментарий
This question was migrated from https://meta.ifixit.com/Answers.
из iRobot