SLIM FOLIO PRO

Complete Setup Guide

Moraine Lake

logitech®

CONTENTS

English .....3
Deutsch .....8
Français .....13
Italiano .....18
Español .....23
Portugues .....28
Nederlands .....33
Svenska .....38
Dansk .....43
Norsk .....48
Suomi .....53
Ελληνικά .....58
Πο-ρυσσκυ .....63
Po polsku .....68
Magyar .....73
78. .....فرسی
Česká verze .....83
Slovenčina .....88
Українська .....93
Eesti .....98
Latviski .....103
Lietuviųų .....108
Български .....113
Hrvatski .....118
Srpski .....123
Slovenščina .....128
Română .....133
Türkçe .....138
143 .....العربية
148 .....ناتو

SLIM FOLIO PRO

For iPad Pro 11-inch and iPad Pro 12.9-inch (3rd generation)

KNOW YOUR PRODUCT

Holder for Apple Pencil (2nd gen) and other digital pencils iPad holder USB-C charging port Magnetic dock Shortcut keys Keyboard

logitech $ ^{\textregistered} $

SETTING UP THE CASE

1. Lay keyboard case flat and slide iPad into the bottom part of the holder.

2. Snap the top corners in place to secure iPad.

↓

This product has an automatic wake/sleep feature. Anytime you dock the iPad in the upright typing position, the keyboard will automatically turn on. When lifted out of type mode, the keyboard will automatically turn off to save battery.

TURNING ON THE KEYBOARD

～

Light isn't blinking?

PAIRING IPAD WITH KEYBOARD

1. Place iPad in the upright typing position. The indicator light will blink, which means the keyboard is ready to pair.

Go to iPad Settings > Bluetooth > On. Then press the Bluetooth button located in the top row of your keyboard. Hold for 2 seconds until the status light blinks. The keyboard is discoverable for 2 minutes.

↓

×

2. Go to Settings > Bluetooth > Devices > Slim Folio Pro.

3. A 6-digit code will appear on your iPad screen. Using the Slim Folio Pro keyboard, type in the numbers.

↓

® ♀

4. Press the ENTER key. Now you're ready to type!

Note: If you want to use another iPad with this keyboard case, you will need to go through the pairing process again.