Identifying Refrigerant Type Recovery Program
2 страниц · 416.45 KB · PDF
Identifying Refrigerant Type
This job aid outlines the process for identifying and labeling the refrigerant type in appliances staged for recovery.
MDO associates will stage old appliances and apply a "Needs Recovery, Contains Refrigerant" sticker on each appliance. The technician must determine the refrigerant type for each unit.
Step Action
- 1 If present, remove the appliance compressor cover.
- It's crucial to wear the proper PPE while removing the compressor cover, which can be done by various means (pry, snip, etc.).
- Place the cover inside the refrigerator/freezer or in an approved waste container.
- IMPORTANT: Do not place the cover on top of the refrigerator/freezer.
- IMPORTANT: Watch out for large puddles of water throughout this area while working.
- 2 Confirm Refrigerant Type.
- The location of the appliance
Зарегистрируйтесь на iFixit бесплатно, чтобы прочитать полный текст документа (2 страниц)
Нам нужна бесплатная учетная запись, чтобы блокировать ботов и сохранить iFixit для людей.
