Введение
Use this guide to remove and replace the back cover on your Lenovo ThinkPad X1 Carbon 9th Gen.
Выберете то, что вам нужно
-
-
Use a Phillips #1 screwdriver to loosen the five captive screws holding the back cover.
-
-
-
Insert an opening pick between a corner of the back cover and the chassis, near a hinge.
-
Pry upward to release the retaining clips.
-
Repeat this process for the opposite corner.
-
-
-
-
Insert the opening pick between the cover and the body.
-
Pry upward and release all of the retaining clips.
-
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Lenovo ThinkPad X1 Carbon community for help.
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Lenovo ThinkPad X1 Carbon community for help.
Отменить: Я не выполнил это руководство.
Еще один человек закончил это руководство.
