Введение
This video demonstrates how to replace the SSD, kickstand, touch display module (or screen), thermal module (or heatsink), and Surflink port assembly in your Microsoft Surface Port 8.
Before you begin a display replacement, follow Microsoft's TDM prerequisite steps.
Please refer to the official Microsoft Service Guide for step-by-step instructions.
Chapters
00:00 Introduction and Prerequisite Steps
Disassembly
00:55 rSSD
01:38 Kickstand
02:20 Touch Display Module
05:22 Thermal Module
06:18 Surflink
Reassembly
06:42 Surflink
07:04 Thermal Module
07:58 Touch Display Module
10:28 Kickstand
11:29 rSSD
Выберете то, что вам нужно
Видеоинструкции
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.
3 Комментариев
where to find the speaker mesh and adhesive?
J. K. - Ответить
How does one gain access to TDM Replacement Mode?
Or where can you find a download for software tools USB drive with SDT?
What are the consequences of replacing TDM without running TDM Replacement Mode?
S.J. - Ответить
Is there any adhesive and speaker mesh replacement?
The Microsoft store and The iFixit store don't have them.
Jorge Ramirez-Centeno - Ответить