Введение
Use this guide to remove or replace the earcup cushions on your Sony WH-1000XM3 headphones.
Выберете то, что вам нужно
-
-
Before beginning any repairs, turn off your headphones.
-
Insert a spudger into the gap between the earcup cushion and the earcup frame.
-
Pry up the earcup cushion by tilting the spudger downwards to release the plastic clips.
-
Repeat the previous step around the perimeter of the earcup cushion to release the remaining clips.
-
-
Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
To reassemble your device, follow the above steps in reverse order.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.
Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
To reassemble your device, follow the above steps in reverse order.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.
Отменить: Я не выполнил это руководство.
15 участников успешно повторили данное руководство.
2 Комментариев
Bedankt! Net even nodig. Instructies pads erg summier en uitgebreide handleiding Sony staat het niet in. Wilde niet mijn fijne koptelefoon kapotmaken!
