Перейти к основному содержанию

​Вступительная история: iPhone 8 Plus Wi-Fi Diversity Antenna Flex

Отредактированно Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

До
После
Без изменений
Устройство
iPhone 8 Plus
Type
replacement
Thing
Antenna Flex Cable
Title
iPhone 8 Plus Antenna Flex Cable
Introduction
Use this guide to replace the small flex cable running from the Lightning connector flex to the logic board in the iPhone 8 Plus. One of the iPhone’s primary antennas is integrated into its lower case, and the signals are routed through this flex cable. Replacing it may resolve a number of connectivity issues.
Time Required Min
Нет оценки
Time Required Max
Нет оценки
Imageid
До
После
Difficulty
Moderate
Conclusion
Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
'''To reassemble your device, follow the above steps in reverse order.'''
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Check out our [https://www.ifixit.com/Answers/Device/iPhone%208%20Plus|Answers community] for troubleshooting help.
Author
Public
Нет

Требования для руководства

Инструменты

  • P2 Pentalobe Screwdriver iPhone x1 added.
  • iOpener x1 added.
  • Suction Handle x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.
  • Spudger x1 added.
  • Tweezers x1 added.
  • Phillips #000 Screwdriver x1 added.
  • Tri-point Y000 Screwdriver x1 added.

Запчасти

  • iPhone 8 Plus Display Assembly Adhesive x1 added.

Шаги

Шаг №: 1
До
После
Шаг №: 2
До
После
Шаг №: 3
До
После
Шаг №: 4
До
После
Шаг №: 5
До
После
Шаг №: 6
До
После