Перейти к основному содержанию
Редактирование шага 6 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Use a spudger to pry the hard drive away from the interface board. Wedge the flat end of the spudger between the interface board and the far right side of hard drive and wiggle back and forth until the hard drive slides out about a sixteenth of an inch. Then move to the other side and repeat the procedure. Go back and forth until the hard drive slides free.

When reinstalling the hard drive, make sure that you don't slide the top pins into the lower row of holes.

Ваш вклад лицензируется под свободной лицензией Creative Commons.