Перейти к основному содержанию
Редактирование шага 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use the flat end of a spudger to disconnect the touchpad cable connector from its socket in the logic board.

Slightly twisting the flat end of a spudger is an easy way to pry up the cable connector from these types of sockets.

Be careful to only pry up against the connector, and not the logic board socket.

Ваш вклад лицензируется под свободной лицензией Creative Commons.