Перейти к основному содержанию

Procedimiento de Apertura del iPad Air 2 Wi-Fi

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 18 руководства, которые включают этот шаг.

Английский
Испанский
Шаг 8
iPad Air 2 Wi-Fi  Opening Procedure: шаг 0, изображение 1 из 3 iPad Air 2 Wi-Fi  Opening Procedure: шаг 0, изображение 2 из 3 iPad Air 2 Wi-Fi  Opening Procedure: шаг 0, изображение 3 из 3
  • Slide the pick along the edge of the display, towards the headphone jack.

  • If there is still a considerable amount of resistance when sliding the opening pick, repeat the iOpener heating procedure and apply additional heat.

  • Be careful not to let the opening pick slide between the fused LCD and front panel, as doing so can permanently damage the display.

  • A good rule of thumb is to never insert the opening pick more than a quarter inch (6 mm) into the iPad.

Desliza la púa a lo largo del borde de la pantalla, en sentido hacia el jack de auriculares.

Si aún hay una resistencia considerable cuando deslizas la púa de apertura, repite el proceso de calentado del iOpener y aplica calor adicional.

Ten cuidado de no deslizar la púa de apertura entre el LCD y el panel frontal, hacerlo puede dañar permanentemente la pantalla.

Una buena regla general es no insertar la púa de apertura más de un cuarto de pulgada (6 mm) dentro del iPad.

Ваш вклад лицензируется под свободной лицензией Creative Commons .