et-3760 will not print multiple color correctly.
I replaced the ink and it still will not print multiple color correctly. I cleaned heads and etc...
Просмотр:
Неудачных голосовЛюбой пользователь с репутацией больше 20 может отмечать комментарии и посты как проблемные.
Показать детали
Репутация: 13
Опубликовано:
I replaced the ink and it still will not print multiple color correctly. I cleaned heads and etc...
Репутация: 1
Опубликовано:
My epson print in blank, is echo thank I'm do I have sucked sleeves with a syringe I have given them maintenance and nothing, it has full ink
Показать детали
Репутация: 1
Опубликовано:
Thx for your opinion. I will now sleep much better.
Показать детали
Репутация: 685,4к
Опубликовано:
See step #6 of this guide and replace the two batteries:
Показать детали
Kjell Olav Naley @kjellolavnaley
Репутация: 35
Опубликовано:
Hei -
Do any of the cameras in AVP have Autofocus? Can they be TLens from poLight in Norway?
Показать детали
Репутация: 49
Опубликовано:
How to reset your anti theft system in a 2001 Grand jeep Cherokee Laredo
*
Репутация: 685,4к
Опубликовано:
Step 1
Enter your Jeep and press the Lock button on your keyless remote five times in 10 seconds.
Insert your key into the car's ignition, turn it to the "Run" position and wait for the car's chimes to stop.
Press and hold the "Unlock" button on your remote, and then press and hold the "Panic" button while still holding "Unlock." Hold both buttons together for one second and release.
Wait for a chime to sound and press and release the "Lock" and "Unlock" buttons on your remote.
Press and release the "Lock" button by itself and wait for the car's chimes to sound again to indicate successful resetting. Remove the key from the ignition when you are done to finish the procedure.
Показать детали
Репутация: 13
Опубликовано:
keeps says storage space is running. How can I fix this problem?
Репутация: 1
Опубликовано:
Did not work, no advice about moving apps to SD card when no option displayed
Показать детали
Репутация: 43
Опубликовано:
my HP Laserjet 2055d leaves two black marks at the back of the printouts.
i have completely replaced the pickup assembly unit but with no avail.
anyone can help
but just wanted to let you know that i have already tested several toners.
i also have completely replaced the whole pickup assembly picture attached.
and have cleaned all the rollers inside the machine.
Репутация: 43
Опубликовано:
but just wanted to let you know that i have already tested several toners.
i also have completely replaced the whole pickup assembly picture attached.
and have cleaned all the rollers inside the machine. [image|3199582][image|3199583]
Показать детали
Репутация: 85
Опубликовано:
A power bank was dropped on my mobile phone in the upper right corner and first the half phone display was not seen and later the mobile whole screen appears black but sounds comes when I use the volume button and power button
Репутация: 1
Опубликовано:
My phone by mistake fallen in swimming pool for 2 minutes
Показать детали
Репутация: 1
Опубликовано:
why does my Frigidaire microwave keeps tripping the circuit breaker
Репутация: 784,8к
Опубликовано:
@johanabur your voting habit is tripping the "voting ring alert" which raises suspicion.
Показать детали
Репутация: 13
Опубликовано:
I have a ds4 controller that works via Bluetooth but is unable to work with a wired connection to the PlayStation and pc. I figured the port wasn’t working so I decided to swap the port with another controller whose analog sticks are broken. This new port works perfectly but when making the swap, the controller still doesn’t show up as a wired connection.
I can provide pictures or answer any questions to help troubleshoot this issue. At this point I’m more intrigued on how to get it working than anything else. Any hardware that I should be looking at that could be the culprit here?
Worth noting: Since the wired connection wasn’t working, i decided to download ds4windows to see how the Bluetooth connection to the pc would hold up vs input lag. During this process, I was changing settings on ds4 along with the controller device in my pc control panel. I disabled a driver that a video recommended during this. Not sure if I might have done something to alter the controllers ability to recognize the wired connection.
Thank you!
This has been solved. Needed to get the correct usb connection for the controller model. Ordered this online and now the controller works fine.
Репутация: 13
Опубликовано:
This has been solved. Needed to get the correct usb connection for the controller model. Ordered this online and now the controller works fine.
Ой! Я хотел бы изменить свое мнение.
Развернуть / свернуть
Пройден
Наверх
Ошибка
Вниз
Открыть справку