there really isnt much help online with regards To 2005 not 1998/99 teardown, schenatics and/or advise. I want toknow how...

I have a 1999 furby baby whose mouth sensor is totally unresponsive, i dont even know where its located inside and how to...

Happen to have another 2012 type model that has the same type of motor? You can just plug in another, I am going to be listing some on eBay again, if you're sure that's what you need. ...Not sure? Can you send or email me a video? Btw: I helped someone fix her boom on Skype

I usually use a vinegar based rust remover and an old toothbrush. Then brush on some WD40 and let it sit and dry overnight, i dont even rinse anything, just wait for it to soak in and dry

Kay a very short term solution can be putting your finger or something in its mouth and tilting it on its side or on its back / holding it upside down for anywhere from like 10 to 60 seconds, depending on how long it needs to be upside down fed..... it will stay awake probably just one time. You may need to take more drastic measures and open up its back, find the "sync screw" underneath the back sensor button dealy and fiddle with it,may need to be tighter...or just a tad looser (fiddle with it while its awake, eventually it will start acting different to let you know what works or if you should keep fiddling with the screw