Этот профиль еще не завершен.
Завершенные руководства
Ответы
Hi, I have personally replaced my own iPhone 5S battery and from the sounds of what you are experiencing, there could be two problems. The first is when you re-attached the ribbon cables for the screen that you didn’t seat the cables into position properly, if this is the case, then you may have to open your phone again to check the cables. The second thing that may have happened is screen damage. To much pressure on the screen when the phone is open can cause damage to the display. If the screen is warped or bumpy then it is most likely a broken screen. Any more details and I will be willing to assist.
Читать далееCheck too see if the laptop has a charging light, and if so make sure the light shows a charging indicator when plugged in. If it does not, then it could be a faulty charger or a short somewhere on the laptop motherboard. If you charger has a light on it showing its working fine and the laptop has a charge indicator showing that its not charging then it could be a short. If the charger or laptop do not have power indicators then go ahead and leave a comment for me too assist some more.
Читать далееThere is a very fragile ribbon cable that attaches to the home button from the body of the phone. This cable may have been damaged during the screen replacement that you had performed, and the way to fix this is to open the phone and check and see if the home button cable is plugged in all the way. If it is, then the cable itself may be damaged and you may need a new home button. Note that replacement home buttons do not work with touch ID since it has to be the original home button for it to work. Hopefully this helps.
Читать далееFrom the sounds of it you may have a driver or hardware issue. The audio driver may need to be updated but you should first check and see if Windows detects the device. (1) Right-click on speaker icon at the bottom right of the taskbar (2) Click Sounds (3) A window should appear; click the Playback tab and you should see your connected headphones (4) If they are there, then right-click on them and click Test If not audio plays or your headphones don’t show up your next course of action is to check the drivers. (1) Type into the search bar at the bottom left of your taskbar “Device Manager” and hit enter to open it (2) Expand the section called Audio inputs and outputs (should be a speaker icon) (3) Right-click on the one that says something like “Speakers/Headphones” (4) Click properties (5) Then click update driver and select Search automatically for updated driver software (6) Follow the prompts and complete the steps it shows (7) If this doesn’t work, then you can try to roll back the driver If none of...
Читать далееDoes your monitor show a splash screen when you turn it on from the off state? If so, try to see if the vertical line affects the splash screen before the monitor boots fully and shows your Windows desktop. If it is shown during the boot process of the monitor, then it may need to be replaced. If it is not shown during the monitor boot process, then you should try replacing the video cable that connects your PC to your monitor. If the problem was fixed, then it was a faulty cable. If not it may be a software issue (unlikely) and may need further diagnoses, or it could still be a problem with the monitor itself. Hopefully this helps!
Читать далееI would recommend trying to charge the battery over a whole night and don’t unplug it at all in that time frame. New batteries need to be properly calibrated before the displayed battery level becomes accurate. This is so the phone know’s where the batteries max capacity is at so it can display more accurate charge amounts. Hope this helps!
Читать далееFrom doing a little research I can suggest doing a few things. Restarting Windows file explorer is my first suggestion. A lot of problems with the taskbar is caused by windows explorer. This can be done with the following steps: (1) Open file explorer (2) Hit Control+Alt+Delete and select Task Manager (3) Navigate through the Processes tab of task manager until you find a process called Windows Explorer (4) Right click on it and click Restart (5) Wait a few moments and try Youtube, Netflix, or opening a photo after your taskbar reappears My second recommendation is to restart your computer use Windows in “safe mode”. This mode boots Windows with only programs necessary for operation. A guide from Microsoft on how to do this can be found here. After booting into safe mode, then you can try to open a photo or watch Youtube/Netflix. Hopefully the first one works. If the second one helps let me know so that problem can be troubleshooted further.
Читать далееSadly, I was not able to find any useful repair guides for you specific camera. Though, I was able to find some parts that might be able to fix the camera. These are off of ebay, so your purchases are at your own discretion. Here is an AC DC input door that I found for the camera. GENUINE FUJIFILM FINEPIX S700 AV DC IN DOOR REPAIR PARTS Here is a battery holder tray that I found for another type of Fujifilm camera that might work. Fujifilm-FinePix-S-Series-S2/S3-Pro-Digital-SLR-Camera-4-Battery-Holder-Tray-OEM If neither of those work you can contact Fujifilms for a warranty if you still have one. If your warranty expired, then you may need to just tape over the battery cover to keep it closed. Hopefully this works!
Читать далееFrom the looks of it; you appear to have ordered the screen for the iPhone 6S with 3 connectors and not the screen for the iPhone 6 with 4 connectors. If this is the case, then the iPhone 6 screen will needed to be ordered. If you have received the screen no more than 30 days ago, then you should be able to get some store credit via returning your other screen to iFixIt. If your screen wasn’t bought from iFixIt then you’ll have to check how to return it yourself. Hopefully this helps!
Читать далееIf you have tried restarting the device then a hard restart may help. This can be done by holding down the power button for a total of 40 seconds. You will note that the screen will go dark at 7 to 8 seconds but keep the power button held down until you reach at least 40 seconds. Once done, release and try to power on. If you still have troubles with the connection than I recommend trying to connect to the specific WiFi network with a different device. If neither of these work, please add a message so I can help some more. Hope this works!
Читать далееСтраница 1 из 2