Please share battery pinout for A1057 battery (for Powerbook G4 1.67 A1107)

I see that it is very hard to find a new battery for PowerBook G4 17`` I have found only 20yr old batteries that are...

Can I use Left hinge with wifi/camera cables from the A1465 (MacBook Air 11 mid 2012) ? Or they are not compatible? Maybe...

I want to buy an original MacBook Air keyboard with the upper case. Unfortunately, I stay too far from the US and the...

I want to buy MacBook Air 2012 13’’ logic board and start it without MacBook. What is the minimum set of electronic parts...

I replaced the battery cells with a model system build with cheap second hand batteries of completely different chemistry. I saw a lot of problems during charge and discharge. Generally speaking the battery became completely unpredictable. The main goal is to get a battery board which can work with batteries of ANY chemistry. I saw the bq20851 chip on the board inside the battery. This chip can be reprogrammed by cheap USB Chinese boards for about 10$ (CP2112 for googling). I bought such a board and connect it to the battery (see the picture: GND = black wire, SDA = red wire, SCL = white wire). According to the documentation (Texas Instruments`s "SBS􏰀COMPLIANT GAS GAUGE IC FOR USE WITH THE bq29311" ) the battery used sophisticated algorithm to calculate discharge termination voltage constants EDV0, EDV1 and EDV2. But it is possible to completely disable this algorithm and force the battery to use the user-defined fixed values of these constants. To make this working it is necessary to switch off the EDV...

J25 connector`s 2,3, 4, 5, 6, 7 corresponds to Battery connector`s P1(closer to the corner of the battery), B2, B3, B4, B5, B6(far from the corner of the battery). So P1 = BATTERY + B2 = ⏚ B3 = BATT_CLC B4 = BATT_DATA B5 = PMU_BATT_DET_L B6 = BATTERY - I also used electrical tester to check the wires from the J25 connector to the battery connector to ensure that P1 is connected to J25`s N2, B2 to J25`s N3.....and J25`s N7 to B6. The tester shows about 11V when connected to P1(+) and B6(-) of the battery disconnected from laptop.