Этот профиль еще не завершен.
Вопросы
I have recently removed the CPU from an iPhone SE 3rd. gen. But the A15 CPU is different from the iPhone 13 A15 CPU in...
Читать далееHi! I have an iPhone 11 which previously was dropped and I had to swap the bottom board. I have transplanted Baseband CPU,...
Читать далееHi! I have an iPhone 12 Pro which does not boot up. I have checked VDD_MAIN I had short which I have cleared. Connected to...
Читать далееI have the NEW Taptic Engine fitted but the problem still exist. Is that possible that it can not receive the proper...
Читать далееHi! I have Changed Back Housing on an iPhone SE2020 which previously was bent. After that I have fitted back everything...
Читать далееHi! I have an iPhone X with a 256 GB memory. I want to remove it and put it on an Xs board as an upgrade. Not sure if...
Читать далееiPhone 8 wireless charging Not working! The phone charge normally with the USB charging cable, but when i put in the...
Читать далееHello! I have an iPhone 8 came in as won’t power on, no charge. Customer said that she was using her phone as normal, and...
Читать далееI have an iPad Air 2 which is starts to boot then turns off. After screen keeps flashing with Apple Logo. When I check...
Читать далееHi! I have an iPhone 8 (Intel version) which acting strange. Phone boots normally!!! Connecting to DC power it draw...
Читать далееСтраница 1 из 2
Ответы
So finally what happend? Did you resolved this problem? If yes, could you please share how or what was the solution to fix. I have the exact same problem. IMEI, WiFi address and Bluetooth address present somtimes find Wifi but it seems signal very low.
Читать далееHi! I have the exact problem. I did the same as above said. Still no Luck with the charging. Also wireless charging NOT works.
Читать далееThis is the thing… If I plug it into my mac it does not recognise it. I try to put it into DFU mode But nothing happen. Im an iOS Technician but I never seen something like this before
Читать далееIs it charging correctly?? What is the reading on ammeter?
Читать далееI had a similar problem. After investigating under Microscope I found out that one of the capacitors on the PCB board are loose. I have re soldered and problem fixed! :)
Читать далееPeter Hupuczi
@peterhupuczi
119
Репутация
5
Ответов
0
Руководства
Пользователь с 06/29/14
Голоса
6
0