L HK

Guys I need help. My s7 edge reboots itself whenever plugged in. Same happens with different adapters and cables. The...

I got my Galaxy S6 active for quite a while and today I have a serious problem with it. I notice the 3 button (home...

I've recently repaired my iPhone 4. Basically switching the mid frame of the iPhone. And now the iPhone can't pick up...

A few days ago I dropped my phone from my pocket. It landed on the bottom left corner. And a few hours later the phone...

So I recently repaired my screen on the iPhone 4 (yea people still used that thing) and when I turn it on it keeps...

he mute switch, volume buttons, vibrator and the power button is connected to one flex cable. And the flex cable is connected to the motherboard under the LCD connector. Check if the connector is loosen or not

If your screen is functioning probably then it's probably a software problem

If you dropped your phone in water it is most likely that your phone 's motherboard is fried. The phone is trying to recover itself. You should probably say goodbye to your phone because Apple doesn't fix water damaged phone.

Trying this. Not sure if it will work 1) Backup your device via icloud (use assistive touch for home button) 2) Use a new touch id home button 3) Put your iPhone in DFU mode. Restore it via iTunes If it doesn't work: solution 1) Grab your original components and take your phone to the Apple store solution 2) 1) Put your original home button back in the phone 2) DFU restore your device 3) Jailbreak your device 4) Use a tweak called Virtual Home as alternative

According to Apple you would need to reinstall iTunes. And when Apple tells you to reinstall iTunes you know that's a dumba** response. Maybe it was caused by the hardware because the iPhone 6s also encountered the same problem and have to use the original touch id cable for it to work. Try put your original home button and front camera module in the new screen and see if it works

I have a few questions 1) Why is it disabled. 2) Are your buttons damaged? If not you should be able to force shut down your iPhone

You can check your flex cable connector. But most likely you would need a new screen