Репутация: 13
2
1
Hi everyone, i did a screen replacement of my iphone 5 but after that the front camera doesn't work anymore, i tried to reseat the connector but steel not working, could i screw up the logic board? help!!!
Это хороший вопрос?
Репутация: 30,6к
25
71
41
I have two like this and it is board damage at the very edge of the board.
Был ли этот ответ полезен?
Репутация: 6,1к
15
20
5
you probably damaged the front camera flex cable. they are very fragile, replace and your camera will be fine
Был ли этот ответ полезен?
should it matter if the earpiece and the brightness adjuster still working?
i bought a replacement camera from ifixit as well and did the replacement, they don't work. the camera when turned on just gives a small glimpse of what it sees and then freezes, do you know what the problem is?
Был ли этот ответ полезен?
Репутация: 727
3
1
It seems you break the cable of front-facing camera. Can you describe more detail about the front -facing camera.
Был ли этот ответ полезен?
Репутация: 37,6к
22
51
42
Does the back camera work? Some times if back cameras broke it won't cycle to the front camera
Был ли этот ответ полезен?
Jess do you mean damage around were the camera contacts to the motherboard?
Fire up a few pics and Jesus can compare
Yes--there is a row of very tiny SMD components between flex connector and board edge.
The other had damage to another tiny component on the other side of the connector. I will try to post a pic later
За последние 24часов: 0
За последние 7 дней: 1
За последние 30 дней: 1
За всё время: 6,747
