Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Second generation of CDMA iPad 2 with 16, 32, or 64 GB and Dual Core A5 Processor. Model Number A1397. Repair is detailed and requires heat and prying.

67вопросов Показать все

ipad 2 not activating error

This is sorta a follow up to a previous question I had asked.(Replaced digitizer and antennas, still searching..)

None of the previous problems were fixed btw.

So we were instructed to restore the ipad to factory. Now we are getting the:

"Your iPad could not be activated because the activation server is temporarily unavailable. Try connecting your iPad to iTUnes to activate it, or try again in a couple of minutes.

If this problem persists, contact Apple Support at apple.com/support"

What do?

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 5

Комментарии:

Mine to just after updating to 9.3 - totally bricked my iPad2

из

Добавить комментарий

5 Ответов

Наиболее полезный ответ

I would check for damage in the flex between the main board and the cell service board

Был ли этот ответ полезен?

Оценка 1

Комментарии:

Hi Jessa,

Vortex's comment below seems to describe the problem I'm having on an iPad 4 which came to me for a battery replacement, it was re-booting every couple minutes.. New battery - No Change, Log files report temperature sensor failure on sensors 0,6 & 1. iPad wont Activate, displays "searching"

Question : if I can find someone that can replace the base band chip, will it function as normal..

Many Thanks

Paul

из

Добавить комментарий

look into log files..

I think baseband temperature sensor fails working causing the part to shutdown, causing the device to reset, and so on

see also Nathan Rakes post, which ist the effect caused by this

Был ли этот ответ полезен?

Оценка 1
Добавить комментарий

I have seen this error many times on iphones with broken baseband chip after water damage or impact damages.

Itunes trying to read device's baseband chip (IMEI number or something like that) to activate the phone.

I guess same thing happening to your ipad CDMA. Baseband chip looks like not functioning.

Reasons

1- If its water damaged try to clean mainboard shortcuts and resolder corroded components.

2- if it has impact damaged, using hot air on the baseband chip may bring the baseband function back. I dont know What temperature and howmany minutes. But you can google for it.

Good luck ...

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

Hi.

How can i check the flex between board and cell service board?

I mean, if i check bouth sides of the flex i have continuty, but how can i check if the pads are soldered well?

Thanks?

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

What i want to do with my Ipad 2? Activation server is unavailable?

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

Добавьте свой ответ

Nathan Rakes будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 5

За всё время: 6,539