nichrome wire selection for toaster repair

Question

Toaster

A helpful collection of toaster repair and disassembly guides.

57вопросов Показать все

ted ballou @tedballou

Репутация: 2

1

Опубликовано: 17 июл 2016 г.

Опции

nichrome wire selection for toaster repair

I have a vintage toaster that has been limping along for half a century or more, with sentimental value. I have already twisted together bits of nichrome in several places where it was broken and am thinking it's time to replace it all. I'm looking at ordering nichrome wire for this purpose and haven't figured out the specs on the wire to order. Suggestions?

This page is helpful, though a bit confusing:

http://www.jacobs-online.biz/nichrome/Ni...

Thanks!

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 0

Добавить комментарий

1 ответ

Выбранное решение

mayer @mayer

Репутация: 685,3к

MacHale Enterprises

3,4к

1,1к

2,6к

Опубликовано: 18 июл 2016 г.

Опции

While I was trying to find your wire, I found this really excellent guide on repairing it:

http://home.howstuffworks.com/toaster1.h...

There's also no flies on the iFixit guide here:

Toaster Troubleshooting

It gives the wire and links to it in the Break in the nichrome wire section.

Был ли этот ответ полезен?

Да Нет

Оценка 1

3 Комментариев:

Thanks for the comment; I am aware of both these links. My question is how to specify the nichrome wire, to buy for replacing all of the old, easily broken wire in the old toaster. This wire comes in a wide range of thicknesses and resistance per foot, as seen in the link I gave in my original post. I guess I should just choose a wire spec for the required length (maybe 200 inches?) that results in a wattage comparable to a commercial toaster.

19 июл 2016 г. из ted ballou

Well I don't have the toaster in front of me to measure it. If it was, I'd put a digital caliper on it and measure it. Digital Caliper

19 июл 2016 г. из mayer

Measure resistance / foot of what u have rap string around innards 4 feet, look at Rbay

24 окт 2017 г. из Dchristensen

Добавить комментарий

Thanks for the comment; I am aware of both these links. My question is how to specify the nichrome wire, to buy for replacing all of the old, easily broken wire in the old toaster. This wire comes in a wide range of thicknesses and resistance per foot, as seen in the link I gave in my original post. I guess I should just choose a wire spec for the required length (maybe 200 inches?) that results in a wattage comparable to a commercial toaster. — ted ballou
Well I don't have the toaster in front of me to measure it. If it was, I'd put a digital caliper on it and measure it. Digital Caliper — mayer
Measure resistance / foot of what u have rap string around innards 4 feet, look at Rbay — Dchristensen

Toaster

nichrome wire selection for toaster repair

1 ответ

Добавьте свой ответ