iPhone 3GS

Обновленная версия iPhone 3G с более высокой скоростью обработки. Ремонт этого устройства схож с iPhone 3G, и требует простых отверток и инструментов для вскрытия. Модель A1303; 16 или 32 ГБ памяти; с Черной или Белой задней пластиковой крышкой.

Опции

trouble with home button

Hi,

I've brought a used iPhone 3gs 16gb with broken home button, or I thought so.

I alreday had an other 3gs, so when I changed the entire display assemply of the broken with the one working. It worked great.

I was hundred precent sure it was the home-flex/button. so I orded one from the site. I changed it, but the home button is still not functioning. the iphone is still good when I put the display assembly from the other one into it.

So where to look for the problem :)

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Да Нет

Счет -1

2 Комментариев

does the "broken" home display work in the other iphone?

24 мая 2011 г. из pollytintop

no, the problem is somewhere in the display assembly, but where, I don't know

I've also changed the digitizer to a new one :(, so I do want to throw it away

24 мая 2011 г. из Sami420

Добавить комментарий

Опубликовано: 24 мая 2011 г.

Опции

disassemble the digitiser and home button. clean where the home button sits in the midframe and the back of the home button. as the digitiser plays no part in the home button action I can only imagine that it is installed incorrectly on top of the home button. (ie the digitiser has no electrical contacts with home button) you may also like to check that the 2 gold prongs on the bottom of the home button haven't been flattened... they need to be about 45 degrees to make contact with top of dock.

Был ли этот ответ полезен?

Да Нет

Счет 4

1 Комментарий:

done, no changes, now I've also destroyed the working iphone, something is wrong in the midframe.

it doesn't register any sim-card, saying no sim installed :(

26 мая 2011 г. из Sami420

Добавить комментарий

iPhone 3GS

trouble with home button

1 ответ

Добавьте свой ответ