Перейти к основному содержанию

Audio IC C12 Jumper

Hi, can someone tell me the value (Ohms) of R1103 Resistor near the audio IC. I removed the Audio IC to make a jumper on C12 ( R1103) resistor but the R1103 is missing so i need to know if i can make a jumper without the resistor (If the value is around 10 Ohms)

Отвечено! View the answer У меня та же проблема

Это хороший вопрос?

по рейтингу 0
Добавить комментарий

Skip the upgrade.

Take $10 off $50 with
SKIPANDSAVE10

Save Now

Skip the upgrade.

Take $10 off $50 with
SKIPANDSAVE10

Save Now

1 Ответ

Выбранное решение

According to the schematic it is a 33.2 ohm resistor.

http://prntscr.com/mze1fz

Был ли этот ответ полезен?

по рейтингу 2

Комментарии:

i was thinking that but wasn't sure if it was 33.2 Kohm or 33.2 ohm

от

If it was kiloohms the decimal point shouldn't matter as the value being 0.2 khms off wouldn't really cause any problems on a circuit.

The ones labelled 0 ohms also are written on the schematic as 0.00 ohms so it should be okay.

от

Добавить комментарий

Добавьте свой ответ

Adrian Zymeri будет вечно благодарен.
Просмотр статистики:

За 24 часа: 0

За 7 дней: 3

За 30 дней: 10

За всё время: 54