Репутация: 13
1
Hello,
I just broke the LCD thermal sensor CABLE of my Late 2009 27” iMac.
Besides changing the heat sink, is there another option to consider?
Also, is there a way of checking if the port is damaged before doing anything else? Just in case.
Thank you
A.
Это хороший вопрос?
Репутация: 685,3к
3,4к
1,1к
2,6к
Strip back the insulation on the wire and stick it in the receptacle.
UPDATE
I could not find the sensor without the heat sink but you can get it here with free shipping for under $8.00
Был ли этот ответ полезен?
Thank your for your suggestion. Not sure if that will work because there seems to be the rest of the cable inside and I am unable to retrieve it and get the broken part in.
I thought of buying the piece of black plastic aside and breaking the other part and then follow your suggestion. But I don’t know the name of the plastic piece. Does anyone know, please?
You might be able to get a connector off of a junker heat sink which you can splice the wires. Or your other choice is to replace the heat sink assembly iMac 27" Graphics Card Heat Sink Radeon HD 4850, Apple P/Ns 661-5315 (593-1043)
See the tag on the cable? There should be a part number on it, please give us that.
@mayer - its 593-1043, I looked at my parts system ;-}
За последние 24часов: 0
За последние 7 дней: 0
За последние 30 дней: 3
За всё время: 186
2 Комментариев
Please post a few pictures of the damage Adding images to an existing question.
Not sure why thing think the heat sink has any bearing here? Elbows and knees are joints but don't have direct involvement with each other.
из Dan
Thank you for answering, Just put the picture online. I thought it was the name of this cable. What is the correct name, please? Thank you.
из A. J. M.