Репутация: 11
1
Hello everyone
I just disassembled my ps4 pro for thermal paste replacement and dust cleaning, but the problem is that after I Reassembled it , the fan speed doesn't change and is constantly on lowest possible RPM which causes overheating problems and makes the console turn off after 30 or so minutes
I would appreciate any help,tips or tricks to what causes this problem and how to fix it.
Thanks
Это хороший вопрос?
Репутация: 160,3к
11
202
371
Couple of things to check:
Is it the long triple beep overheat warning then shut off?
Был ли этот ответ полезен?
my thermal pads were kinda torn apart when I disassembled the console , so I replaced them with thermal paste, but the clamp is installed correctly.
no , no long triple beep , it just shows the too hot hot message and if I don't turn it off , it shuts the console down while showing the message.
can this happen because of replacing the pads with paste?
Yes, the paste doesn't transfer heat well with thermal contacts that have quite a gap between each other. You'll need to replace those thermal pads.
@benjamen50 can I put the pads on top of the paste or do I have to remove the paste ?
The black chips should not have any thermal paste on them they should have thermal pads on them only.
За последние 24 часов: 2
За последние 7 дней: 7
За последние 30 дней: 27
За всё время: 1,351
